Reekie Experience
9533 12/09/2019 Stud busting 1 off siezed lifting bolt
9529 11/09/2019 90 DIA SHAFT TO BE DRILLED AND TAPPED BOTH ENDS AS PER SAMPLE.
9529 11/09/2019 80 DIA SHAFT TO BE DRILLED BOTH ENDS FOR PISTON AS PER SAMPLE
9527 10/09/2019 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
9520 09/09/2019 Gripper Jack Cap (Item 5)
9520 09/09/2019 Gripper Jack Piston (Item 4)
9520 09/09/2019 Gripper Jack Base (Items 2 & 3)
9524 09/09/2019 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
9526 09/09/2019 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
9518 06/09/2019 Cover Casing
9514 04/09/2019 28301- Nexen Buzzard – Vessel, 2” NB Sch 160 Nozzle Machining
9517 04/09/2019 Facing stainless steel PCM attachment flange
9507 30/08/2019 Front Section (Item C)
9507 30/08/2019 Mid Section (Item B)
9507 30/08/2019 Rear Section (Item A)
9503 29/08/2019 M36X2 OD – M30X3.5 ID Inserts
9504 29/08/2019 Alignment check of 2 off flanges for flow spool manufacture
9506 29/08/2019 Hornsea2 Flange Machining
9501 28/08/2019 Coulport – Heat Exchanger Welding
9498 27/08/2019 Slide Plate for Jacking Box
9498 27/08/2019 Wear Plate for Jacking Box
9493 26/08/2019 Drilling 4 off 80mm holes through I-beam
9494 26/08/2019 Overflow Plate Machining
(Post Fabrication)
9488 22/08/2019 Disc 11.1/2″ x 4TPI Stub Acme
9488 22/08/2019 Disc 10.0″ x 4TPI Stub Acme
9489 22/08/2019 Plain End Vessel to prepped both ends
9489 22/08/2019 Domed End vessel to prep both ends
9490 22/08/2019 Gripper with 12 Pockets
9490 22/08/2019 Gripper Jack Cap (Item 5)
9490 22/08/2019 Gripper Jack Piston (Item 4)
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >