Pipe Cutting & Weld Prepping Machines

Pipe Cutting & Weld Prepping

Select up to 3 models and click ‘compare’ button below to see machine specs together. Click on ‘spec’ to see the full technical specifications if available.

Machine	Description	Spec	Compare
3.1 Split Casing Type
T65	Ø34 to Ø73	n/a
T115	Ø70 to Ø115	n/a
MC2	Ø25 to Ø250	n/a
R10sc	Ø125 to Ø276	n/a
R15sc	Ø250 to Ø381	n/a
R20sc	Ø380 to Ø508	n/a
C1	Ø152 to Ø394 (Ø6" to Ø12")	n/a
C2	Ø304 to Ø521 (Ø12" to Ø18")	n/a
C3	Ø457 to Ø699 (Ø18" to Ø24")	n/a
C4	Ø610 to Ø851 (Ø24" to Ø30")	n/a
C5	Ø762 to Ø1003 (Ø30" to Ø36")	n/a
C6	Ø914 to Ø1154 (Ø36" to Ø42")	n/a
C7	Ø1016 to Ø1307 (Ø42" to Ø48")	n/a
3.2 Pipe Cutting and Weld Prepping Bore Location
Various	Rquires open end, various machines from other categories, eg R16, 6DA-4SB	n/a
3.3 Pipe Cutting and Weld Prepping Milling Machine
RDG 18-2a	Ø315 to Ø2000mm, max wall thickness of 45mm	n/a
Fein 6000 Pipe Mill	Crawls round pipe on chains	n/a
3.4 Pipe Cutting Saws
Mot 618	Pneumatic powered hacksaw, pipes up to Ø440mm	n/a
Cengar	Pneumatic hacksaw	n/a
Tigair	Pneumatic hacksaw, pipes up to Ø150mm	n/a
AStx 649	Electric powered hacksaw, pipes up to Ø440mm	n/a
3.5 Tube/Pipe End Profiling / Weld Prepping Bore Location - Self Centring
R2	Ø19 to Ø38mm (Ø3/4" to Ø1.1/2") requires 100mm minimum parallel length of bore	n/a
R3	Ø36 to Ø79mm (Ø1.7/16" to Ø3.1/8") requires 100mm minimum parallel length of bore	n/a
3.6 Tube End Profiling Outside Diameter
R1	Ø0 TO Ø64mm (Ø0" to Ø2.5") requires 100mm minimum length	n/a
R4	Ø65 TO Ø114mm (Ø1.3/8" to Ø4") requires 100mm minimum length	n/a
R6	Ø95 TO Ø170mm (Ø3.1/8" to Ø6") requires 100mm minimum length	n/a