News
-
On Monday 9th September 2019, Jim Richmond’s colleagues, past and present, family and friends gathered to give him a “surprise” lunch party to celebrate 50 years of working at
-
APPRENTICES, FOLLOWING IN THE FAMILY FOOTSTEPS
We are delighted to welcome two new Apprentices to Reekie Machining. Jordan Richmond, has joined us as a 1st year Apprentice, in Mechanical Engineering with an emphasise on fitting. Through
-
SUMMER INTERNSHIP AT REEKIE MACHINING.
This summer we are pleased to have taken on Gareth Mitchell, a 4th year student on a five year, MEng Aero-Mechanical Engineering Course at the University of Strathclyde, as an Intern. Reekie
-
It has been a very busy couple of months at Reekie Machining and our Insitu Team are rapidly building up air miles to complete jobs Worldwide. -
-
Along with upgrading machines for vertical boring we also continue to build the capacity within the work shop for turning, installing a Takisawa EX-110 CNC centre lathe. Pictured above is the
-
At Reekie Machining we don’t like to sit around, so after the installation of the Giddings and Lewis, 5ft vertical borer last year we have already had it upgraded, through retro-fitting it with
-
After a lot of hard work and commitment, Ross Cameron completed his Level 2 Modern Apprenticeship in Industrial Applications: Performing Industrial Operations. He is pictured above receiving
-
The footage shows our 6ft (1.22m) CNC GLF vertical boring machine, taking a cut on a stainless steel casting for pump components. This boring machine was bought to give us the ability to
-
GWYNT Y MOR OFFSHORE WIND FARM PROJECT
20 wind towers of the 60, on Phase 2 of the Gwynt y Mor Offshore Wind Farm have successfully been machined by Reekie’s In Situ Machining Team. Reekie Machining are currently assisting
-
The Reekie Family are not just experts in, in situ and onsite machining; they are also very talented athletes. Jared Reekie, the Machine Shop Director has taken time off from the busy
-
At the beginning of April, a 10 ton forklift arrived in the car park at Reekie Machining, along with 30” to 48”, 12 meter carbon steel free issue pipes to be cut and manufactured into
-
Reekie Machining are delighted that they achieved the upgrade to the new 2015 standards for ISO9001 & ISO14001. We continue to strive to ensure that at all times we are working to the
-
REEKIE MACHINING STAFF UNIFORM
With the sunshine, came a new uniform for the staff at Reekie Machining. Now not only are they identifiable by their boiler suits whilst working in the machine shop and in situ but also in
-
Reekie Machining are known for not standing still, we have continued to move forward by boosting our capacity within the machine shop. We recently purchased the following machines to increase our
-
On the 20th December Reekie Machining received a thorough Achilles audit which validates the capability, competence and compliance of us, as a supplier to utility companies such as EDF. The
-
Reekie Machining and EDF Energy are proud to announce that they have established a ‘Framework Agreement’, for the supply of In Situ Machining and other associated services, as of November
-
Reekie Machining are delighted to announce that Andrew Archibald, has completed his Level 3 Modern Apprenticeship in Engineering: Mechanical Manufacturing Engineering (CNC Machining) at SCQF
-
SYSTEM CERTIFICATION - BM TRADA
System Certification – BM Trada Reekie Machining are pleased to announce that we have been audited and meet the requirements of both ISO14001 and ISO18001, building on the success of holding
-
Reekie Machining had a slow start to machining on Monday morning as the staff admired a very special visitor that had landed over the weekend. Vicky, a Mark II, 1939 Battle of Britain
-
MAXIMISING ROTATING PLANT EFFICIENCY
Can we help you maximise your rotating plant effieciency whilst reducing installation headaches? for further information please read our lastest news article that can be found following this
-
Temporary content is available however disruptions may occur, we apologise for any inconvenience caused during this time. Please visit our contact page if desired content is missing
-
UK METROLOGY SERVICE EXPANSION
Due to increased demand for high tolerance precision machining on site, we have invested in new equipment to boost our metrology services and cements our status as the leading metrology service
-
REEKIE MACHINING BECOMES 500TH RECIPIENT OF RENFREWSHIRE COUNCIL GRANT
The on site machining specialists, Reekie Machining, recently became the 500th local business in Renfrewshire to sign up for a scheme aimed at boosting the local economy. David Reekie, Operations
-
Reekie were recently called in to machine the 240mm diameter x 195mm end of a reclaimer shaft that was heavily damaged by a slipping bearing. The job was located inside a biomass storage unit at a
-
COME SEE US AT EWEA, FRANKFURT - OFFSHORE WIND EXHIBITION
Reekie Machining will be exhibiting as part of the Scottish Pavilion at EWEA Offshore, Frankfurt from 19th - 21st November 2013. We have developed several market leading solutions to a number of
-
Recruitment is now open for full time machinists to work at our machine shop in Renfrew. CNC Miller Full time, time-served, experienced CNC Miller with experience of Fanuc control system, to
-
NEW FORTH ROAD CROSSING, MAJOR CONTRACT WIN FOR IN SITU MACHINING
Reekie Machining have won a large contract to machine box girder sections for the new Forth Road Crossing. The workscope involved the design and manufacture of a portable 6x4m 3-axis milling rig that
-
ANOTHER SUCCESSFUL OUTAGE DELIVERED BY REEKIE MACHINING
Our team have successfully completed a number of on site machining projects during an outage at Longannet Power station in Scotland. Although we were originally contracted on a short term basis, in
-
ON SITE MACHINE TOOL HIRE (WITH OR WITHOUT OPERATORS)
Equipment for hire includes line boring, drilling, milling, flange facing, valve repair and other machining operations. Out project team can also design and manufacture bespoke machine tools should
-
ON SITE AND SUBCONTRACT MACHINING SUPPORT FOR OUTAGE IN FORGINGS PLANT
Our team have just successfully completed a scheduled outage that involved both insitu and sub contract machining services for a Steel Forgings Plant in West Lothian. The workscope included on site
-
ON SITE MACHINING - POWER STATION OUTAGE
A rapid response call to a large coal fired power station in the UK was successfully completed this week. We were asked to undertake work on the main boiler feed pump despite two competitors already
-
SEIZED STUD REMOVAL, NEW DRILLING MACHINE
Successful on site machining trial complete of a new, compact, low height drilling machine and method for drilling out seized studs with mating flange in place for a well known Power Generation
-
QUARRIES AND MINING - SUB CONTRACT MACHINING
Another quick and safe turnaround for Reekie Machining, repairing a crusher jaw at our site in Renfrew. It would normally take our customer up to 6 weeks for a delivery from their previous supplier.
-
FLANGE FACING MACHINING - 6 METRE DIAMETER
This week saw the return of our squad from a project that involved machining of a large structure at our customer's site. The flange we worked on had an OD of approx 6000mm and we machined it to our
-
WESTERN ISLES WAVE FARM MARKS MILESTONE IN RENEWABLES
Recent Reekie customers and developer of the Oyster Wave Power technology, Aquamarine Power, announced plans to produce what will become the world's largest commercial wave farm. More on the story
-
MAKING WAVES IN THE SUBSEA SECTOR
Never one to shy away from finding a solution, Reekie Machining has taken on a number of challenges from a wide range of customers in the Subsea sector. Within the space of a few years, the number of
-
REEKIE NEWSLETTER AND PRESS RELEASE SITE.
As part of our continuous effort on informing you of our latest services we are pleased to announce a new website containing the latest Reekie
-
We are looking to recruit a competent C.N.C. Turner with experience of basic programming/ setting and operation on a Doosan Puma CNC lathe, with a minimum of 2 years experience on Fanuc control
-
REEKIE MACHINING - IN-SITU, ON SITE AND SUBCONTRACT MACHINING ENVIRONMENTAL POLICY
Reekie Machining are committed to continuing to improve our environmental performance, minimising our environmental impact and making resource efficiency a core requirement of all our operations.
-
Following the completion specialist [[http://www.reekiemachining.co.uk/services/in_situ_machining,in-situ machining]] work onboard the Montorse Platform, Reekie Machining obtained a feedback score of
-
Reekie Machining successfully completed the design, manufacture and proving trials of specialised machining equipment for Babcock Marine's Devonport Royal Dockyard. The equipment was required to
-
Reekie Machining purchased a new 3 Axis Bridge Type Machining Centre, the Dugard Eagle Bridge Mill, in March 2008. The new machine has a capacity of 3.2x1.9x1m. This machine extends our
-
COAL FIRE POWER STATION OUTAGE
Reekie Machining have secured a contact to carry out a large scope of work at two outages at one the UKs coal fired power stations. The scope of work will mainly cover
-
The [[http://www.reekiemachining.co.uk/services/in_situ_machining, in-situ machining]] service recently aquired a portable coordinate measuring machine - the 2.8m Romer arm. The 6 axis measuring arm
-
NEW OPERATIONS MANAGER APPOINTED
Long standing Reekie staff member, Craig McIlroy, has been promoted to the post of Operations Manager, taking over from Andy Tait who has retired. Craig, who started his career with Reekie as an
-
Reekie Machining is providing ongoing [[http://www.reekiemachining.co.uk/services/sub_contract_machining, sub contract machining]] services to RailCare Scotland, one of the leading rolling stock
-
Reekie Machining has secured a significant contract from UK company CTC Marine for [[http://www.reekiemachining.co.uk/services/in_situ_machining, in-situ machining ]] on its multi-purpose oil & gas
Archive:
List all news
"Reekie Machining always seem to come up with the goods, they are our first choise for in situ machining."
Dick Piercy, Diving Technical Engineer, Technip UK
"We manufacture and maintain rescue submarines and equipment used by submariners worldwide, and have worked with Reekie Machining for many years. Quite simply, Reekie is one of the few companies we would trust to meet the phenomenally tight tolerances we demand."
Robbie Gorman,
James Fisher Defence Ltd